Janitorial < click to download Catalog

Product Search

    Secure Checkout
    MGU One Up Ultratron Floor Finish 25% Solids 4/1 gal CASE

    Thumbnail Filmstrip of MGU One Up Ultratron Floor Finish 25% Solids 4/1 gal CASE Images

      Purchase MGU One Up Ultratron Floor Finish 25% Solids 4/1 gal CASE

      SKU: MGU
      MGU One Up Ultratron Floor Finish 25% Solids 4/1 gal CASE

      $134.64 $114.44

      OneUp Discount: $20.20

       

      Description

      Ultratron Floor Finish 25% Solids

      ULTRA HIGH GLOSS FLOOR FINISH

      Ultratron Floor Coating is designed for high traffic, high visibility floors. Because it dries to such a high level of gloss, you can start with a floor looking its best from the very first coat. For use on vinyl, vinyl asbestos, asphalt tile, rubber, linoleum, terrazzo etc. When used with the companion ONE UP Floor Care products your floors will never look better.

      Specifications: Odor.................................................................................Low Appearance..........................................................White liquid pH..........................................................................8.5 +/- 0.5 Specific Gravity..................................................1.020 +/- 0.5 Av. Coverage..................................2000-2500 sq. ft. per gal. Flash Point.....................................................................None Solids..............................................................................25%

      Directions: For complete application instructions see the ONE UP Floor Care Application Training Guide. May be applied over other hard, non-wax finishes. For ultimate results, the old brand of finish should be removed using Mega-Strip Ultra Powerful Aggressive Stripper. Then apply Ultratron Floor Coating to a clean, dry floor. 1. When applying to an uncoated floor, establish a base coat using 2 coats of Seal Shield Floor Sealer. 2. Apply one to three coats of Ultratron in straight, even strokes that will cover fully, but not puddle. Allow at least 30 minutes between coats. Apply each coat less liberally than the previous one.