My Cart: 0 item(s)
Thumbnail Filmstrip of Truekleen C480 Durapol Multi Use Floor Finish Images
Description
Truekleen C480 Durapol Multi Use Floor Finish
Non-dulling, Multi-use Floor finish
This easy to maintain floor finish can be buffed and restored like a wax, but contains no wax and is not slippery like wax. It applies easily and smoothly and dries quickly to a gloss without polishing. When, after heavy traffic it begins to show wear, light buffing restores its appearance.
Benefits
- Balanced Hardness: Hard and tough enough to resist scuffing from heavy traffic, but responds to dry buffing, and is an excellent base for spray buffing.
- Easy Application: Every coat goes down effortlessly and smoothly with no mop drag.
- Slip Resistant: Meets ASTM standards with James slip test machine.
- Self Polishing: Dries to a high gloss without buffing and holds its gloss under traffic.
- Metal Interlock: In spite of its resistance to water and detergents, Durapol can be easily removed with its companion stripper when desired.
SPECIFICATIONS
- APPEARANCE........................................Milky liquid
- SOLIDS CONTENT...............................18.0 ± 0.5%
- ODOR................................Characteristic floor finish
- SPECIFIC GRAVITY...........................1.020 ± 0.005
- DENSITY.......................................8.51 ± 0.05 lb/gal
- BOILING POINT.....................................Near 212°F
- pH...............................................................8.5 ± 0.5
- FLASH POINT...................................None to boiling
- STABILITY..................................One year minimum
- PRODUCT CODE............................................C480
HOW TO USE
May be applied over other hard, non-wax finishes. But for assured results, the old brand of finish should be removed, and the new finish applied to a clean, dry floor.
1. Apply a thin uniform coat in a figure eight motion using a clean finish mop or applicator.
2. Allow to dry completely. Do not re-work finish while it is drying.
3. When dry, an additional coat, or coats, may be applied if needed. Apply each succeeding coat a little less liberally than the previous one.
FUTURE CARE: Remove gritty soil with a damp or treated mop. Use a neutral detergent solution to remove ground-in dirt. Revive dull areas by spray-buffing or by applying finish to worn areas. The thermoplastic properties of Durapol allow it to be buffed at any speed.