Documents click here
ONE ® represents a true advance in floor finish performance. This super high
solids formula produces unmatched “off-the-mop” gloss with extended gloss
retention. Utilizing exclusive Advanced Polymer Technology, this superior
floor coating will produce maximum gloss with fewer coats than conventional
floor finishes. Combination sealer / finish saves product costs. Exceptional
response to UHS burnishing.
Authorized UL Product
Floor Preparation: Strip old finish and wax using your preferred NCL
floor stripper following label directions. For baseboards and corners, use an
NCL baseboard stripper following label directions. If necessary, rinse
thoroughly with clean water and allow to completely dry.
Application: Using a clean mop or applicator apply thin uniform coats
of ONE ® Labor Saving Sealer / Finish. Allow to dry for a minimum of 30 minutes
after each coat. Do not apply more than 4 coats in a 24 hour period. Floor
should be thoroughly dry before traffic is allowed in area.
High Speed Buffing and Burnishing: ONE ® Labor Saving Sealer / Finish
is an ideal for use with high speed polishing or burninshing machines of
1500-3000 rpm (electric, battery or propane). Prior to buffing or burnishing
dust mop the floor surface using an NCL dust mop treatment. Buff or dry burnish
using an NCL Aqua Magic buffing pad. For spray buffing, mop-on or autoscubber
restoring use a prefered NCL gloss restorer.
Routine Maintenance: Dust mop using mop treated with an NCL dust mop
treatment. Damp mop or clean with an automatic scrubber using your preferred NCL
neutral floor cleaner following label directions.
FEATURES & BENEFITS
Applicable for use in high traffic areas
Achieves maximum versatility
MPS77 Advanced Polymer Technology produces exceptional gloss from fewer
Sealer/finish combination for product cost savings
Maximum resistance to scratches and scuffs